運用自動投粉系統

運用自動投粉系統是專為化工行業設計的，不僅能提高生產效率還節約了設備成本，與單機上料相比，更具應用優勢。

如何運用自動投粉系統這是一個非常重要的問題，根據料量劑的反饋來給定量器的脈沖流量信號，當料量累計達到一定的數值之后，記理器制儀會給電磁閥們或者是泵一個開關的吸納好，

從而達到對閥門、泵的啟動和關閉的控制，這樣才能實現假聊的手動控制好人自動化，

自動投粉系統精度高，操作起來簡單方便，非常容易實現，

關于運用自動投粉系統的定量問題，達安泰機械小編給大家介紹一下：

啟動鍵：運用自動投粉系統每次操作完成之后，按此鍵可以將定量值清零，重新開始下一批的操作。
運用自動投粉系統停止鍵：中央供料系統若是遇到緊急的情況，可按此鍵停止閥門。
定量自動投粉系統計量器：

可以任意的設置所需要的加入料的量，計量器控制儀具開關量信號的輸出，

當設定好定量值后，記理器制儀會給電磁閥們或者是泵的一個開關信號，

當達到設定的數值之后，自動關閉泵或者閥門。帶有瞬時的流量，累計流量，

運用自動投粉系統中加入量顯示的功能控制儀帶有面板清零的裝置。

運用自動投粉系統恢復按鍵：記載突然斷電或者是其他原因造成的定量控制中途停止時，按恢復鍵就可以繼續的加入未完成的定量值中。


工業發展迅速，企業對于設備生產效率要求也更高，成型機的供料也趨向自動化、智能化和人性化控制，供料主要分為中央供料系統及單機上料方式，而目前企業使用*多的則是自動投粉系統，更能滿足企業的生產要求。
The use of automatic powder system is designed for the chemical industry, not only can improve production efficiency also saves the cost of equipment, compared with the single machine, more application advantages.
The use of automatic powder system
How to use the automatic powder system This is a very important issue, according to the amount of material feedback to the quantizer pulse flow signal, when the material reaches a certain value, the instrument system will give the solenoid valve or Is a pump to absorb a good,

So as to achieve the valve, the pump start and shut down the control, so as to achieve a false control of the manual control of good people automation,

The use of automatic powder system, high precision, easy to operate, very easy to achieve,

On the use of automatic powder system of quantitative problems, Da Aetai mechanical Xiaobian to tell you about:

Start key: use the automatic powder system After each operation is completed, press this key to clear the value, restart the next batch of operations.
Use the automatic puffing system stop key: If the central feeding system encounters an emergency situation, press this key to stop the valve.
Quantitative automatic powder system meter:

Can be set arbitrarily set the amount of the required material, the meter control instrument switch signal output,

When set the quantitative value, the instrument system will give the solenoid valve or a pump switch signal,

When the set value is reached, the pump or valve is automatically closed. With instantaneous traffic, cumulative traffic,

The use of automatic powder system to add the amount of display function of the controller with a panel clear device.

The use of automatic powder system to restore the button: record a sudden power failure or other reasons caused by the quantitative control stop halfway, press the resume button can continue to join the unfinished quantitative value.


Industrial development is rapid, the enterprise for the equipment production efficiency requirements are higher, the molding machine for the material also tends to automation, intelligent and human control, feed is divided into the central feeding system and stand-alone feeding method, and the current business use the most Is the automatic powder system, more to meet the production requirements of enterprises.