Tire wire separator

輪胎拉絲機器,Tire wire separator

Tire wire separator一：型號：YULJ-1200（輪胎雙頭拉出機Pull the tire double machine）

機器組成部件：主機體2件，Machine component parts: the main body 2

二：液壓站1件，Hydraulic station 1 PCS。

三：升降臺1件， lifting platform  1PCS。

四：曲型斜體9.2米輸送帶1件，Italics 9.2 m curved conveyor 1 PCS。

五：自動剪臺1件（用作將輪胎剪斷，然后拉絲，拉絲后斷絲很小），

Automatic cut sets a (used tires cut, then drawing after drawing a small broken wire

抽出的鋼絲輸送帶長6米1件，Drawn steel wire conveyor length 6 m 1

六：拉力：25噸（內部壓力為10MPa時）Pull: 25 tons (when the internal pressure of 10MPa)

七：*大內部壓力：15MPa    Maximum internal pressure: 15MPa

八：機器總功率：9.2米輸送帶2.2kw，6米PVC輸送帶1.5kw，振動電機1.5kw,液壓站37.11kw,12米輸送帶2.2kw（可以不配置價格減RMB：8萬）,剪臺12.5kw，共57kw。

Total power: 9.2 m conveyor 2.2kw, 6 米 PVC conveyor 1.5kw, vibration motor 1.5kw, hydraulic station 37.11kw, 12 米 conveyor 2.2kw (can not configure Price Less RMB: 8 million) and shear station 12.5 kw, a total of 57kw.

九：冷卻系統：風冷    Cooling System: Air Cooled

處理輪胎范圍：?800-?1200mm（*大1400MM）

Handling tire range: ?800-?1200mm (maximum 1400MM)

十：處理能力：50-60個/小時，Processing capacity :50-60 / hour

十一：操作方式：可自動或手動按鈕式操控

Mode of operation: automatic or manual push-button contro

十二：機器總重量：約15噸。Total weight: about 15 tons

十三：液壓件：油泵國產永靈，閥件臺灣，油管國產Hydraulic parts: pump domestic Yong Ling, Taiwan valves, tubing domestic

十四：電器：西門子+歐姆龍+國內品牌，PLC三凌

Appliances: Siemens + + domestic brands Omron, PLC Mitsubishi

電機：西門子Motor: Siemens

減速箱：SEW     Gearbox: SEW

十五：交貨期：70-80天左右。Delivery :70-80 days

十六：付款方式：先預付50%訂金，后付50%貨款出貨前付清，然后到廠驗收裝貨柜。Payment: prepay 50% deposit, 50% payment after payment before shipment paid, and then to the factory acceptance loaded containers.

P十八：貨柜要求2個40尺高柜裝運，Container requires two 40-foot shipping container注：以上價格含小量配件，其它安裝。Note: The above prices include small parts, other installation.

Tire wire separatort輪胎拉絲機設備技術參數Tire drawing machine equipment technical parameters

設備性能如下：Equipment performance as follows:

一、處理輪胎范圍：直徑800~1200mm。A deal with tire range: 800 ~ 1200mm

（1）拉絲處理產量：約50~60個/小時，Brushed Yield: about 50 ~ 60PCS / hour

（2）冷卻系統：風冷（AH1012 兩臺）Cooling System: Air Cooled (AH1012 )  two  。

（3）三相電電源 （以上電壓和頻率需要根據你們的要求自行核實）Three-phase power supply (over voltage and frequency according to your needs to verify their own requirements)

一、 設備技術參數：Equipment technical parameters:

1、 剪臺輸送機（M09208）：Shear conveyor (M09208)

1） 驅動方式：鏈傳動方式Drive mode: Chain Transmission

2） 機長：L＝3.45m，Captain: L = 3.45m

3） 帶速：V＝  _ 13   m/min，Belt speed: V = _ 13 m / min

4） 輸送物料：輪胎（直徑≤φ1200mm）Transportation of materials: tires (diameter ≤ φ1200mm)

5） 輸送量：60個/小時，Throughput: 60 / hour

6） 電機減速機型號：    SK32100ADB     Motor reducer Model: SK32100ADB   

7） 減速機廠家：  德國廣州公司（諾德）        Reducer manufacturers: Germany Guangzhou (NORD)

2、自動剪臺（M09209）：Automatic cutting station (M09209):

1）壓力：25噸（內部壓力為10MPa時），Pressure: 25 tons (when the internal pressure of 10MPa).

      2）油泵型號及生產廠家：    浙江     The pump manufacturer and model: Zhejiang

3）閥門生產廠家：臺灣，  Valve manufacturer: Taiwan

4）3、曲型斜體9.2米輸送機（M09210）：Italics 9.2 m curved conveyor (M09210):

1）帶速：V＝ 10.6      m/min   Belt speed: V = 10.6 m / min

2）輸送物料：輪胎（直徑≤φ1200mm）Transportation of materials: tires (diameter ≤ φ1200mm)

3）輸送量：60個/小時，Throughput: 60 / hour

4）電機減速機型號：    SK32100      Motor reducer Model: SK32100    

5）減速機廠家：  德國廣州公司（諾德）          

4、 拉絲機（M09211）：Drawing Machine (M09211)

（1）單側拉力：25噸（內部壓力為10MPa時），設計*大內部壓力：15Mpa。Unilateral force: 25 tons (internal pressure of 10MPa), the design maximum internal pressure: 15Mpa.

（2）拉鉤的材質  45#  Retractors material 45 #

（3）V槽的材質  45#,V groove material 45 #

(4)油泵型號及生產廠家：國產永靈；Pump models and manufacturers: Domestic Yong Ling

(5)閥門生產廠家：臺灣；Valve manufacturers: Taiwan

5、 Tire wire separator鐵鋼絲輸送機（M09211）：Iron wire conveyor (M09211)

（1）帶速：V＝   10.3   m/min，Belt speed: V = 10.3 m / min

（2）輸送物料：輪胎（直徑≤φ1200mm）Transportation of materials: tires (diameter ≤ φ1200mm)

8） （3)輸送量：60個/小時，Throughput: 60 / hour

（4）電機減速機型號：SK32100ADB     Motor reducer Model: SK32100ADB

（5）減速機廠家：諾德。Reducer manufacturers: Nordisk

三、Tire wire separator電氣參數：Electrical parameters

1、低壓電氣元件采用SIEMENS品牌,PLC采用三菱PLC進行控制。每個設備均具有啟動信號，停止信號，急停信號，報警點，故障復位等**措施。SIEMENS brand low voltage electrical components, PLC Mitsubishi PLC control. Each device has a start signal, a stop signal, emergency stop signal, alarm, fault reset and other security measures.

2、電柜顏色為乳白色，每臺機器獨立一個電柜。Cabinet color is white, each machine independently an electrical cabinet